Tips to Install a Fingerprint Door Lock

The fingerprint door lock is the right answer to provide a good security system for housing. It uses fingerprints to get access to the door. Therefore, only those whose fingerprints are recorded on the door system can access the key. At present, this security system has been upgraded and is available at an affordable price.

fingerprint door lock can also be very useful in protecting your home from burglars. With this security system, you can safely leave the house without anyone in it. Now, you can install it for the protection of your home. Just buy a kit with all the parts needed. Then, you can do the following steps.

The first thing you need to do after getting all the parts in your hand is to drill a hole in your door. The holes depend on the type of key you are buying. Some require a few holes in your door and door frame. Also, you need to make a hole in the side of your door about two inches for your latch. Then, make a hole in your door frame to lock the deadbolt.

Image result for fingerprint door lock

Image Source: Google

Then, adjust the deadbolt for mounting to the lock mechanism. Place a screwdriver in the driver board hole and rotate it until it is seated properly. When you open the door, the deadbolt will pull far enough. On the other hand, the latch will extend enough to close tightly when you lock the door.

The next thing to do is to install deadbolts, hooks, and strikes. Deadbolts and deadbolts have faces that sit on the edge of the door. Secure it to the door using a screw that is inserted into the hole. Then, hammer the strike or metal plate into the hole that you have drilled at the edge of the door to prevent your door frame from being damaged.